Technical Data; Power Requirements - PRETUL ROTI-20P Folleto Instructivo

Technical Data

Code
Description
Chuck
Voltage
Speed
Rotation
Torque
Boring capacity
Battery
Charger
WARNING
Avoid the risk of electric shock or severe injury. When the power cable gets damaged
it should only be replaced by the manufacturer or at a
The build quality of the electric insulation is altered if spills or liquid gets into the tool while in use.
Do not expose to rain, liquids and/or dampness.
Before gaining access to the terminals all power sources should be disconnected.
WARNING

Power Requirements

WARNING Tools with double insulation and reinforced insulation
eliminate the need of a grounded power cord with three prongs or a grounded
power connection.
WARNING
When using an extension cable, verify the gauge is enough for
the power that your product needs. A lower gauge cable will cause voltage drop
in the line, resulting in power loss and overheating. The following table shows
the right size to use depending on cable's length and the ampere capability
shown in the tool's nameplate. When in doubt use the next higher gauge.
Ampere
Capacity
from 0 A and up to 10 A
from 10 A and up to 13 A
from 13 A and up to 15 A
from 15 A and up to 20 A
WARNING When operating power tools outdoors, use a
extension cable labeled "For Outdoors Use". These extensions are especially designed
for operating outdoors and reduce the risk of electric shock.
Position 1:
Position 2:
Ion-Lithium 20 V
Input:
Number of
Conductors
3 (one grounded)
* It is safe to use only if the extensions have a built-in artifact for over current protection.
AWG = American Wire Gauge. Reference: NMX-J-195-ANCE
ROTI-20P
27082
Cordless hammer drill / drill / driver
1/2" keyless
20 V
0 - 400 RPM and
0 - 1 500 RPM and
Forward - Reverse
21 + 3 functions
Concrete: 0.5" | Wood: 0.6" | Metal: 0.2"
2 Ah | Charging time: 4 hours approximately.
Voltage: 127 V
Frequency: 60 Hz
Power: 190 W
Power cord grips used in this product: Type "Y".
Tool build quality: Class III.
Charger tool build quality: Reinforced insulation..
Extension gauge
from 6' to 49'
18 AWG( * )
16 AWG
14 AWG
8 AWG
grounded
0 - 6 400 strokes per minute
0 - 24 000 strokes per minute
Output: 21 V 0,5 A
Authorized Service Center.
| higher than 49'
16 AWG
14 AWG
12 AWG
6 AWG
ENGLISH
3