CSL 303597 Manual Del Usuario página 10

6. Touch field functions
The touch field functions depend on the corresponding system and the currently
running software or the used game.
7. Charging
Charge the device completely before using it for the first time!
The controller's battery is charged when you connect it to a free USB port in your
system using the USB cable. Please note that while doing this, the system should
be turned on or in sleep mode.
As long as the charging process continues, the LED of the controller is switched
on. When the charging process is complete, the status LED on the controller turns
off.
8. Changing the control pad
You can choose between 3 different control pads. Simply remove the currently
installed control pad and then insert the desired control pad.
9. Safety instructions and disclaimer
Please do not try to open the device to carry out repairs or modifications by
yourself. Avoid contact with the mains supply. The device does not carry current
only when disconnected. Please do not short-circuit the product.
The device is not approved for outdoor use. Therefore, please use it only in dry
surroundings. Protect it from high humidity, water and snow. Do not expose the
device to high temperatures.
Do not expose the device to sudden changes in temperature or strong vibrations,
as this could damage the electronic components. Check the device for any dam-
age before using it. The device should not be used if it has been subject to impact
or has been damaged in any other way. Please also follow the national regulations
and restrictions.
10
English