Operating Instructions and Parts Manual
General Purpose
Filter
Model PA210000
Description
The general purpose filter is designed to remove
most liquid and solid particles from the air supply.
Unpacking
After unpacking the unit, inspect carefully for any
damage that may have occurred during transit.
Make sure to tighten fittings, bolts, etc., before
putting unit into service.
Read & Follow all InstRuctIons
save these InstRuctIons
do not dIscaRd
Safety Guidelines
This manual contains information that is very
important to know and understand. This information
is provided for SAFETY and to PREVENT
EQUIPMENT PROBLEMS. To help recognize this
information, observe the following symbols.
situation which, if not avoided, WILL result in death
or serious injury.
situation which, if not avoided, COULD result in
death or serious injury.
situation which, if not avoided, MAY result in minor
or moderate injury.
not followed, may cause damage to equipment.
note: Information that requires special attention.
© 2012 Campbell Hausfeld/Scott Fetzer
Danger indicates an
imminently hazardous
Warning indicates a
potentially hazardous
Caution indicates a
potentially hazardous
Notice indicates
important information, that if
For parts, product & service information visit
www.campbellhausfeld.com
Figure 1 - Pa210000
Specifications
Temperature . . . . 40°F to 140°F
Range . . . . . . . . . . (5°C to 60°C)
Maximum
Pressure . . . . . . . . . . . . . 250 PSI
Air Inlet/
Outlet . . . . . . . . . . . 3/8 inch NPT
Filter
Element . . . . . . . . . . . . .5 Micron
Rated Flow . . . . . . . . . . 50 SCFM
Drain Capacity . . . . . . . 2 .7 fl . oz .
IN738600AV 9/12