Samsung HL-T7288W Manual Del Usuario página 78

Deleting the Photo files
You can delete photo (JPEG) files saved on a USB storage device.
1 After switching the mode to WISELINK, select a memory device that you have
installed. (Refer to page 70~71)
2 Press the ENTER button to select Photo.
JPEG files and existing folders are displayed.
3 Press the ▲ or ▼ button to select a photo you want to delete and then press the blue
button.
4 Press the ▲ or ▼ button to select Delete or Delete All and then press the ENTER
button.
If you select Delete, only the selected photo will be deleted.
➢
If you select Delete All, all photos in the folder will be deleted.
➢
5 Press the ◄ or ► button to select OK and press the ENTER button.
The photo will be deleted.
➢
If you select Cancel, the deletion is canceled.
➢
To exit WISELINK mode, press the EXIT button on the remote control.
You cannot remove the following files:
➢
● PTP-connected digital camera picture files
● Read-only files
While removing files, don't remove the USB memory device.
➢
You cannot recover a deleted photo file.
➢
Removing read-only files
When removing any read-only files, the screen to the right appears.
Press the ◄ or ► button to select OK, then press the ENTER button.
If you select Cancel, the removing operation is cancelled.
➢
Press the WISELINK button on the remote control to turn on the WISELINK mode.
Deleting Multiple Photos
1 In the Photo list, press the ▲ or ▼ button to select a photo to be deleted and press the
yellow button.
The <✔> mark appears to the left of the selected photo.
➢
Repeat the above operation to select multiple photos.
➢
2 Press the blue button, press the ▲ or ▼ button to select Delete selected File and
press the ENTER button.
3 Press the ◄ or ► button to select OK and press the ENTER button.
The selected photos are deleted.
➢
If you select Cancel, the deletion will be canceled.
➢
To exit WISELINK mode, press the EXIT button on the remote control.
You cannot remove the read-only files from the selected ones.
➢
You cannot restore the removed pictures.
➢
Press the WISELINK button on the remote control to turn on the WISELINK mode.
English - 78