Proxxon CW-matic Manual De Instrucciones página 13

11 Maintenance and care:
Always remove the mains plug before any maintenance or clea-
ning work.
For a long service life, the device should be cleaned after each ti-
me it is used with a soft cloth or brush.
The outside of the top part of the housing can be cleaned with a
soft, damp cloth. The dust box can also be cleaned wet if required.
Mild soap or another suitable cleaning agent can be used. Solvents
or cleaning agents containing alcohol (e.g. petrol, cleaning alcohols
etc.) must be avoided, since these can attack the plastic housing.
A reduction in vacuuming power can be caused by blocked filters,
therefore these should be cleaned and, if necessary, replaced at
regular intervals.
12 Disposal:
Please do not dispose of the device in domestic waste! The device
contains valuable substances that can be recycled. If you have any
questions about this, please contact your local waste management
enterprise or other corresponding municipal facilities.
Caution:
EC Declaration of Conformity
Name and address of the manufacturer:
PROXXON S.A.
6-10, Härebierg
L-6868 Wecker
Product designation: CW-MATIC
Article No.: 27490
In sole responsibility, we declare that this product conforms to the
following directives and normative documents:
EU EMC Directive
EU Low Voltage Directive
Date: 06.05.2011
Dipl.-Ing. Jörg Wagner
PROXXON S.A.
Machine Safety Department
The CE document authorized agent is identical with the signatory.
2004/108/EC
DIN EN 55014-1 / 02.2010
DIN EN 55014-2 / 06.2009
DIN EN 61000-3-2 / 03.2010
DIN EN 61000-3-3 / 06.2009
2006/95/EG
DIN EN 60335-1 / 01.2011
DIN EN 60335-2-2 / 11.2010
- 13 -