Tabla de contenido
Idiomas disponibles
Idiomas disponibles
16/17
3. Description of operation
This appliance operates on the principle of infrared radiation.
The AUTO program is designed to prevent damage to the paint or varnish during the cooling
process.
It is particularly well suited to drying thin products such apaint products (mastic, primer, lacquers)
and any other product requiring high energy input. Infrared rays penetrate the backing material
and heat it by molecular agitation.
This method of drying form the inside out remove the solvents gradually and prevents the formation
of microbubbles. The infrared rays act only on expose surfaces and must therefore be directed only
on the area to be dried.
Infrared drying is a cost-saving method that guarantees a quick highquality result at a low cost.
When using for the first time, avoid all risks increase the distance and drying time.
For the placement of the device see the electrical diagram.
4. Technical details
Input Voltage
Input Power
Curing Area
Temperature range
Time Setting
Light intensity
1,600 mm.
DT6
380V / 50-60 Hz
6 x 1,100 w
1,800 x 1,000 mm.
o
40 - 100
C
(adjustable)
0 - 99 min.
(adjustable)
10 - 100%
2,050 mm.
ENGLISH
DT3
220V / 50-60 Hz
3 x 1,100 w
1,200 x 1,000 mm.
o
35 - 100
C
0 - 99 min.
10 - 100%
2,400 mm.
Tabla de contenido
