Black 1-9/16" Flat Head Screw - Sauder Dresser Manual Del Usuario

Step 12
The tabs should insert freely into the
1
slots. Gently tilt the DRAWER SIDES side
to side until the tabs slip into the slots.
D132
Groove
Insert the DRAWER SIDES (D132 and D138) at
å
an angle into the slot at each end of the RIGHT
DRAWER FRONT (Q2).
3
V2
Surface with
HIDDEN CAM
Fasten the DRAWER BRACE (V2) to the DRAWER
å
FRONT (Q2). Tighten one HIDDEN CAM.
www.sauder.com/services
D138
Q2
Maximum
Arrow
210 degrees
Minimum
190 degrees
Q2
VIEW THE T-LOCK BOX VIDEO
With the palm of your hand, tap the
2
DRAWER BOTTOM down into the groove.
U N
D132
Be sure the DRAWER
BOTTOM inserts into the
DRAWER FRONT groove.
Slide the DRAWER BOTTOM (D975) into the grooves in
å
the DRAWER SIDES (D132 and D138) and RIGHT DRAWER
FRONT (Q2).
4
D132
V2
Fasten the DRAWER BACK (D167) to the DRAWER SIDES (D132
å
and D138) and DRAWER BRACE (V2). Use five BLACK 1-9/16" FLAT
HEAD SCREWS. (30S). Repeat this step for the other DRAWERS
using the DRAWER FRONTS (Q2 and R2). Use the SMALL DRAWER
FRONTS (K2 and L2), SMALL DRAWER SIDES (D10 and D11), and
SMALL DRAWER BACKS (D166) for the small drawers.
414765
F I N
I S H
E D
D975
D138
Q2
Start each screw a few turns before
completely tightening any of them.
30S

BLACK 1-9/16" FLAT HEAD SCREW

(30 used in this step)
D167
D138
Page 17