Maintenance - GMC GCHD18 Manual Del Usuario

Maintenance

WARNING: ALWAYS disconnect from the mains power supply, before carrying
out any maintenance/cleaning of the charger. Remove the battery before
carrying out any maintenance/cleaning of the drill.
Note: Both the drill and the charger contain no user-serviceable parts. If the
device does not perform as outlined in this manual, return it to an authorised
GMC service centre for repair.
General inspection
• Regularly check that all the fixing screws are tight
GB
• Inspect the supply cord of the tool, prior to each use, for damage or wear.
Repairs should be carried out by an authorised GMC service centre. This
advice also applies to extension cords used with this tool
Cleaning
• Keep your tool clean at all times. Dirt and dust will cause internal parts to
wear quickly, and shorten the machine's service life. Clean the body of
your machine with a soft brush, or dry cloth. If available, use clean, dry,
compressed air to blow through the ventilation holes
• Clean the tool casing with a soft damp cloth using a mild detergent. Do not
use alcohol, petrol or strong cleaning agents
• Never use caustic agents to clean plastic parts
Lubrication
• Slightly lubricate all moving parts at regular intervals with a suitable spray
lubricant
Storage
• Store this tool carefully in a secure, dry place out of the reach of children
Disposal
Always adhere to national regulations when disposing of power tools that are no
longer functional and are not viable for repair.
• Do not dispose of power tools, or other waste electrical and electronic
equipment (WEEE), with household waste
• Contact your local waste disposal authority for information on the correct
way to dispose of power tools
12