English - Bonnet Neve PROFILE Instrucciones De Uso

Modello - Modèle - Model
Modell - Modelo - Modelo
Fabbricante - Constructeur - Manufacturer
Hersteller - Fabricante - Fabricante
1. DESCRIPTION
The PROFILE cabinet is available in three different lenghts and in two different heights. The cabinet
is appropriate for the preservation and self-service sale of fresh and/or pre-packed products. Its
main features and dimensions are clearly illustrated in drawings 1, 2, 3, 4, 5, 6 on page 14, 15, 16.
As for its weights, crating included and excluded, see table I on page 17. A wide variety of optional
accessories enabling enhanced functions is also available. To this respect, contact the authorised
after-sales service only.
2. TRANSPORTATION
The cabinet is contained in a specially crated package that enables transportation by the use of
fork-lift trucks. Handle the machine on its own pallet or on a similar platform; use a fork lift truck,
either manual or electric, provided that it is adequate for handling such appliances and it has the
requisite lifting capacity (see page 17 - figs. 7 and 8 and table I). Handling is reserved for the au-
thorised after-sales service.
3. DELIVERY AND STORAGE
Prior to accepting the case from the carrier, check the conditions of the package. If it is showing
visible damage, the machine too may have suffered some consequences. If so, unpack the ma-
chine in the presence of the carrier and sign, with reservation, the delivery bill. The manufacturer
disclaims all liability for damage caused by transportation or incorrect handling during storage.
Unpacking is reserved for the authorised after-sales service. Storing temperature must be between
-25°C and +55°C, air humidity between 30% and 95%. Keep the case away from direct sunlight
and from the elements.
4. INSTALLATION AND AMBIENT CONDITIONS
The cabinet must not be installed in premises containing explosive gas substances. It
can neither be used in the open nor exposed to the rain.
Prior to connecting the cabinet, make sure that the rating plate data correspond to the characte-
ristics of the existing electrical system (see page 19 - tab. III). For correct operation, the machi-
ne must be placed on a level floor (see page 18 - fig. 9), far from sources of heat and/or direct
sunlight, doors, windows, fans or ventilation outlets (see page 18 - fig. 10). It must be granted a
reasonable free front area for customer service.
The room where the appliance is installed must comply with the requirements set forth
on page 18, fig. 11 and tab. II.
IMPORTANT: placing fixed panels on the top of the cabinet is advised against, as this part must be
accessible for servicing purposes.
5. ELECTRICAL CONNECTION
IMPORTANT: AHEAD OF THE CABINET (excluding the master/slave versions, which are already
equipped with it) THERE MUST BE A MULTIPOLAR CUTOFF SWITCH WITH CONTACTS SPACING AT
LEAST 3 mm AND WITH THE ADEQUATE CIRCUIT-BREAKING POWER (see fig. 20). The position of
the cutoff switch must enable its actuation in any EMERGENCY situation (maximum distance 3 m).
Show the position of the cutoff switch to any prospective operator.
PROFILE
Epta Spa - Unità locale: Via degli Alpini 14 - 32020 Limana
(BL) ITALIA Tel. 0437/9681 Telefax 0437/967434

ENGLISH

STATE REVISION
-
ORD. DATE 20.04.2020
PAGE:
N° DOC.
37/59
UM000460