Installing The Mounting Plate - Hinkley HOVER FLUSH 52 Manual De Instrucciones

INSTALLING THE BLADES
WARNING: To reduce the risk of personal injury, do not bend the blades
while installing, balancing the blades, or cleaning the fan.
Insert the blade through the slot in the housing. Align the holes in
1
the blade and the fan motor assembly and secure with a blade
attachment screw and flat washer.
Repeat this procedure with the remaining blades.

INSTALLING THE MOUNTING PLATE

1 Remove one of the three screws on the mounting hub located on
the fan motor.
Loosen the other two screws.
2
Install mounting plate to mounting hub.
3
Line up the two slotted holes with the two loose screws on the
4
mounting hub located on fan motor.
5 Re-install the third screw removed and tighten all three.
Blades
Flat Washer
Lock Washer
Screws
Mounting Hub
Screws
Mounting Plate
©2019 Hinkley Lighting, Inc. | hinkley.com | 09