5. Install the window panel (P) by expanding
Horizontal window
it to fit the length of the window and fully
tightening the pre-assembled screws in
the middle.
Screw come attached
Screw come attached
Vertical window
6.Take the remote control (Q) out of remote
control holder (T). Remove the remote control
Q
T
holder (T). Align the exhaust nozzle to the air
outlet (F) and slide into the back of the unit.
Note:
Always remove the remote control holder
before installing exhaust nozzle connector.Put
the remote control holder back after installation.
7
7. Plug the unit into a 115V/60Hz grounded
electrical outlet.
Important :
Place the unit at least
7.8 in.
away from the wall.
7.8 in.
7.8 in.
