Tabla de contenido
Idiomas disponibles
Idiomas disponibles
ASSEMBLY
TOOLS REQUIRED: PHILLIPS SCREWDRIVER, WRENCH
NOTE: TO ENSURE AN EASIER ASSEMBLY, WE STRONGLY ADVISE
ONLY FINGER TIGHTENING BOLTS DURING INITIAL ASSEMBLY. ONCE
ALL BOLTS ARE INSERTED, FULLY TIGHTEN ALL BOLTS. DO NOT
OVERTIGHTEN.
NOTE: BOLTS SHOULD BE INSERTED FROM THE OUTSIDE OF THE
FIRE PIT.
J
STEP 1
K
Join together two scrollwork
C
sections [C], lining up the holes
in the top and bottom. Attach
J
using two M4 x L18 bolts [J]
K
and M4 x T3 nuts [K].
Repeat to add a third scrollwork section.
Insert the remaining scrollwork
section and attach using two
M4 x L18 bolts [J] and M4 x T3
nuts [K] on either end.
When all sections are secured, tighten
all of the nuts and bolts.
D
STEP 2
I
Turn the assembled scrollwork
upside down on a soft surface to
protect the finish.
Attach the base [D] to the bottom of
the scrollwork using four M6 x L20
H
bolts [H] and M6 nuts [I].
8 | www.bluesk youtdoorliving.com
Tabla de contenido
