Tabla de contenido
®
R&S
ENY81
1.1 Installation
Before putting the instrument into operation, connect the ISN with the ground plane.
Operation without earth leakage connection is prohibited. Operate the equipment only
in dry surroundings (indoor use). Allow any condensation that occurs to evaporate
before putting the instrument into operation. Do not exceed the permissible ambient
temperature, humidity or air pressure. The instrument is not suitable for use in an
explosive atmosphere. Only approved accessory items, connectors, adapters, etc. are
to be used to ensure safe operation. Measurements of radio disturbances should
preferably be performed in shielded rooms.
Circuits inside the ISN are not protected by fuses. Provide adequate arrangements to
protect the ISN against overload.
1.2 Applicable Safety Standards
Development and manufacture of the instrument complies with ISO 9001. The product
meets the requirements of the Low Voltage Directive (LVD) 2006/95/EC based on
IEC/EN 61010-1:2001.
Operating Manual 1309.8649.14-01
Safety Instructions
<
6
Tabla de contenido
