Craftsman CMXPTSG1013NB Manual De Instrucciones página 12

5. Place the washer on top of the cutting
disc . By hand, screw the hex nut
2
on by turning it clockwise. Use
wrench to tighten.
12
NOTICE: Make sure the cutting disc
sitting flush on the threaded shaft.
WARNING: Make sure to tighten the
hex nut firmly against the cutting
5
disc . The cutting disc
2
be loose.
6. Insert the hex key bolt
spindle , and using hex key
9
the bolt counterclockwise to tighten.
DO NOT OVERTIGHTEN.
NOTICE: This is a left handed bolt.
WARNING: Make sure to tighten the
hex key bolt
4
nut .
5
7. Push down on spindle lock
clockwise to unlock the spindle lock .
NOTICE: If the spindle does not spin freely,
repeat step 7.
5
is
2
CAN NOT
2
into the
4
, turn
13
firmly against the hex
and turn
6
6
12
13
ENGLISH
5
2
4
5
9
6
11