Parts; Assembly - Truper ESMA-4-1/2A9 Manual De Instrucciones

Clamp
lever
Axis
lock
4 / " abrasive
1
2
disc included
Outer
flange
Inner
flange
Auxiliary handle
assembling orifice
Clamp
lever
Protection Guard Assembly
• Match both cantilevered parts inside the protection guard with the corresponding
slots in the axis cover.
• Turn 180° into the opposite position.
• Fix pushing the clamp lever.
Protective
guard
Disc Assembly
1. Fit the inner flange onto the axis.
2. Set the disc onto the inner flange.
3. Set the outer flange onto the axis.
• Press the axis lock into the grinder head.
4. Screw the outer flange with the lock nut wrench until securely fastened.
DANGER The axis lock should only be used to change discs.
Never use the wrench to stop the disc while rotating.
6
ENGLISH
Protective
Auxiliary
handle
Switch

Assembly

Slot
guard
Handle
Switch
4 / " abrasive
1
2
disc included
Protective
guard
5/8-11-UNC-1A

Parts

Power cord
protector
Power
supply cable
Lock nut
wrench
3
2
Disc
Inner
flange
Grinder
head
Lock nut wrench
(Included)
Axis
lock
Protective
guard
Vent
slots
4
Outer
flange
1