Changing The Unit Of Measurement Mm / Inch (Unit) - Kroeplin C0 Serie Manual De Instrucciones

Palpadores electrónicos exteriores
Ocultar thumbs Ver también para C0 Serie:
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Zero point adjustment (OFFSET)
7
short
8
1x short
Repeat step 6-8 until the OFFSET value is totally entered.
9
10
1x long
11
12
1x short
13
1x long
The instrument must be adjusted until the nominal value is reached!
If „ERR 07" appears in the display the OFFSET value is out of the acceptable
range (
Technical Data). The instrument must be returned to the
manufacturer for checking.

Changing the unit of measurement mm / inch (UNIT)

You can select between „mm" and „inch".
The gage must be switched on. The SETUP – Menu can be activated in each program.
.....Reducing the first digit
Selecting the next digit
For confirming and saving
Afterwards you will return to the SETUP -
Menu.
Quitting the SETUP – Menu
For confirming and saving.
The instrument returns to the last program
used
43
Tabla de contenido
loading

Este manual también es adecuado para:

C015C015s

Tabla de contenido