9 Maintenance:
The purpose of the maintenance program is to keep the equipment in good working
conditions and to achieve the maximum life of it.
DANGER: Stop the engine before performing any maintenance.
If you need to start up the engine for any type of check, make sure that the area is
well ventilated. Exhaust gases contain poisonous carbon monoxide.
NOTE: Use original GENERGY spare parts or proven quality components for
maintenance.
Maintenance scheduling.
SERVICE
Engine oil
Air filter
Spark plug
Clean fuel filter
Engine valves*
Combustion chamber*
tank*
Fuel hose*
Remove hydraulic body, adjust
turbine and spiral diffuser* Tighten
pump bolts *
NOTE: Perform maintenance more frequently when the equipment is used in
places with a lot of dust or very high temperatures.
NOTE: Services marked with an asterisk have to be performed by a GENERGY
service or qualified service center. Keep a receipt of the operations carried out by the
service center.
NOTE: Lack of compliance with maintenance services will shorten the life of the
generator and produce malfunctions that will not be covered by the warranty.
Warranty will not be respected if the detailed maintenance plan is not observed,
except in case of authorization to skip a service by GENERGY or an authorized
GENERGY service.
MAINTENANCE PERIODS
Check the level before each use. First oil change after 20 hours of
break-in. Subsequent oil changes every 50 hours of use.
Check and clean every 50 hours. Replace every 100hours or before if
it begins to wear out.
Clean and adjust the electrode every 50 hours Replace every 200
hours or before if any damage is noticed in the porcelain, electrode, or
if a proper spark is not produced.
Every 200 hours or 1 year (whichever is first)
Adjust every 200 hours*
IN 0.05-0.08
Clean every 200 hours*
Clean every 200 hours* or 1 year (whichever is first)*
Replace every two years or sooner if any wear is noticed*
Every 200 hours*
16
EX 0.08-0.12