MATCH LIGHTING THE SIDE BURNER:
1. Open the lid to the side burner before lighting.
2. Make sure control knob is in the "OFF" position.
3. Strike and carefully place a match approximately 1/2" (1 to 2 cm) from the
side burner.
4. Turn the side burner control knob to the "HIGH" position. The burner
should light within 5 seconds.
5. If the burner does not light, turn the control knob to "OFF" and wait 5
minutes for gas to dissipate and repeat lighting procedure.
6. If the burner does not light within the first few attempts of match lighting,
there is a problem with the gas supply. Turn off the gas at the burner and cylinder. DO NOT attempt to
operate the side burner until the problem is found and corrected. See "Trouble Shooting" section of this
manual.
CAUTION!
•
The cylinder valve should always be in the off,
or closed, position when the grill is not in use.
TURNING OFF THE SIDE BURNER:
1. Turn off the cylinder valve.
2. Turn the burner control knob to the "OFF" position.
Note:
Turn off LP cylinder first to prevent gas from
being left in the system under pressure.
Note:
OPERATING THE SIDE BURNER:
Never use Charcoal or Lighter Fluid inside your Gas Side burner. Read and follow all warnings and
instructions contained in the preceding sections of this manual.
BREAKING IN YOUR SIDE BURNER:
•
In manufacturing and preserving the components of your side burner, oil residue may be present on
the burner and cooking surfaces of your side burner.
•
Before cooking on your side burner for the first time you should preheat it for 15 minutes on "HIGH" to
burn off these residual oils.
•
DO NOT leave your side burner unattended while in use.
•
DO NOT move grill when in use.
•
DO NOT use water to extinguish flare-ups.
•
Have fire extinguisher readily accessible suitable for use with gas appliances.
7
turn knob clockwise until it stops.
Observe flame height when lit: Flame
should be a Blue/Yellow color between
1"– 2" when burner is on " HIGH".
WARNING
WARNING
To turn off the cylinder valve,
Match
2"
1"
0"