Product Description; Product Overview; Key Features; Inspecting The Contents - R&S RT-ZC20 Manual De Usario

®
R&S RT-ZC20
2

Product Description

2.1

Product Overview

This device can be directly connected to a BNC input connector of a waveform
measuring instrument such as an oscilloscope or recorder. By clamping on a con-
ductor to be measured, the current waveform can easily be captured.
2.2

Key Features

● Highly accurate current detection.
● Easy current measurement.
● Broadband frequency characteristics DC to 100 MHz.
● Permits measurement of low current levels.
● Easy protection function to avoid self-heating during excessive input.
● Unique thin film Hall effect element.
2.3

Inspecting the Contents

● Inspect the package for damage.
Keep a damaged package and the cushioning material until the contents have
been checked for completeness and the instrument has been tested.
If the packaging material shows any signs of stress, notify the carrier as well as
your Rohde & Schwarz service center. Keep the package and cushioning mate-
rial for inspection.
● Inspect the probe.
If there is any damage or defect, or if the R&S RT-ZC20 current probe does not
operate properly, notify your Rohde & Schwarz service center.
● Inspect the accessories.
If the contents are incomplete or damaged, notify your Rohde & Schwarz service
center.
User Manual 1409.7814.02 ─ 01
Product Description
Product Overview
12