Transport, Packaging And Storage; Inspection After Transport; Packaging; Storage - Casselin CPAI350A Manual De Instrucciones

3. TRANSPORT, PACKAGING AND STORAGE

3.1 Inspection after transport

The check for the absence of damage and the completeness of the device must be carried out upon receipt
of the package. In the event of identification of damage due to transport, refuse or accept the delivered
product only with reservations *. A complaint detailing the defects observed must then be made. The
perception of damage is only possible in the event of a complaint formulated within the prescribed time limits,
ie 24-48 hours at most.
* written on the carrier's delivery papers or digital.

3.2 packaging

The packaging of the device must be kept in case of moving, or for a return to the after-sales service. The
inner and outer packaging must be completely removed before using the device. The standards in force in
your country concerning environmental protection must be observed before destroying the packaging.

3.3. Storage

WARNING
The device can be kept in stock, but only in its original, closed packaging.
Storage can be carried out in accordance with these conditions:
• Storage in a dry and non-humid place
• Sheltered from the sun
• Control of the stock exceeding 2 months (general condition of the device and all the constituent elements)
• No material shaking
• Storage in closed room and not outside.

4. EQUIPMENT CHARACTERISTICS

* Subject to change
Model
Temperature
Power
Weight
Dimensions
Dust and grease filter
The stove is equipped with a grease and dust filter located under the appliance.
This filter prevents grease and dust from being sucked up by the fan and entering the device.
The filters should therefore be cleaned regularly with a mild detergent or they can be cleaned in the
dishwasher.
CPAI350A
60 ° C to 240 ° C
500 - 3500 W / 230 V
7.10 Kg
W 340 x D 440 x H 117 mm
EN