Tabla de contenido
Idiomas disponibles
Idiomas disponibles
3. ASSEMBlE lEGS & ATTACH TO ROOF FRAME
Attach all legs to one side first. Let the other side of roof frame rest on the
ground. Repeat for opposite side.
4. SECURE lEGS
To secure the legs to the roof assembly, insert short
pins (# 10051) through the hole at the bottom of each
of the 4-way connectors. Rotate the legs, if necessary,
to align the holes. This will complete the leg assembly
for this side. Repeat for the other side.
5. ATTACH FEET & ANCHOR CANOPY
A. Insert the legs into the foot plates. Align holes.
B. Insert one long pin (10052) through all eight legs to secure base foot. Repeat with each leg.
C. There are four holes on each base foot that the anchor can go into. Select a hole in each base foot. Insert
each anchor into the ground until the round head is touching the base foot.
D. Insert one anchor into all eight base feet.
This is a temporary spike anchor. Not intended for permanent use.
A
B
Page 5
Leg Pole Assembly
800243
10093
C
10431
05-25773-0D
Tabla de contenido
