Tabla de contenido
Idiomas disponibles
Idiomas disponibles
USE
The fan has 3 speeds, its rotating head ensures smooth rotation. It is quiet, with a low energy consumption,
reliable and safe and at the same time, ensures eff ective air circulation.
0 - Fan is off .
1 - Fan is running at low speed.
2 - Fan is running at medium speed.
3 - Fan is running at high speed.
•
The fan can rotate during operation.
•
For the fan head to rotate, push the automatic rotation control down.
•
To stop the rotation of the fan head, pull the automatic rotation control up.
•
The fan head can be set up or down. Loosen the vertical setting nut, adjust the desired angle of the fan
and tighten the nut again.
INSTALLATION
1.
Place stand "A" on to
stand "B" to create an
X-shaped base.
2. Place
the
bottom
tube holder onto the
X-shaped base and
tighten with the four
screws included.
3.
Loosen and remove
the connector from
the bottom tube, slide the plastic base cover
to the base along the bottom tube. Push the
top (inner) tube out and insert the connector
onto the top tube, slide to the bottom tube
and tighten.
4. Install the motor with speed regulator casing
onto the top tube. Make sure the regulator
casing is completely pressed on the top tube
and secure using the included screw.
5.
Loosen the basket assembly pin from the
motor cover.
6. Install the back screen of the protective
basket carefully onto the motor cover and
secure by tightening the assembly pin to the
right.
7.
Push the propeller onto the motor shaft and
tighten by rotating the nut counter-clockwise
8. Attach the front screen to the back screen by
the catches on the edges of the protective
basket, then connect both pieces of the
basket using the attached clips.
9.
Attach the decorative cover to the front part
of the basket.
Position catch
Front screen
Central
nut
Decorative cover
base cover
be. Push the
e connector
ottom tube
lator casing
e regulator
he top tube
ew.
n from the
protective
cover and
y pin to the
or shaft and
er-clockwise
ck screen by
e protective
ces of the
Back screen
Propeller
Motor
Basket
shaft
assembly
pin
Top tube
Base cover
Stand A
Stand B
Motor
cover
Automatic rotation control
Motor
Speed control
Tube connector
Bottom tube
Tube holder
19
GB
Tabla de contenido
