Fusion MS-UD/AV755 Serie Manual De Inicio Rápido página 3

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 29
• Select to adjust the screen and dial brightness.
• Pandora: Press and hold to tell Pandora you like this track and would
like this station to play more tracks similar to it.
Dial
• Turn to adjust the volume.
• Press to switch between zones when adjusting voume.
• Press and hold for at least one second to adjust the subwoofer
levels.
• Turn to move through the menus or adjust a setting.
• Press to select the highlighted option.
• Select to turn on the stereo.
• Hold to turn off the stereo.
Not
• Select to eject an inserted CD or DVD (MS-AV755 only).
shown
• Located on the back side of the stereo face, and accessible only
when the door is open (page 5).
Using the Dial to Select Items
You can use the dial to highlight and select items on the screen.
• Turn the dial to highlight an item on the screen.
• Press the dial to select the highlighted option.
Adjusting the Volume
1
Use the dial to adjust the volume.
2
If necessary, press the dial to switch between zones.
TIP: To control all zones at the same time, press the dial until all zones are
highlighted.
Enabling Standby Mode
You can set the stereo to enter a low-power standby mode when you hold
the stereo takes less than the typical 30 seconds to turn on again.
NOTE: When the stereo is set to use the low-power standby mode, it continues
to draw current from the battery. The maximum current draw in standby mode is
listed in the specifications section in the installation instructions.
> Settings > Standby Mode.
Select
Quick Start Manual
The stereo now enters standby mode when you hold
Stereo Screen
The information displayed on the stereo screen varies depending on the source
selected. This example shows the stereo playing a track from a connected USB
device.
Source
Shuffle status icon
Repeat status icon
Play status icon
Track details (if available)
Album art (if available from a compatible USB source)
NOTE: Album art is not displayed when playing tracks from a device connected using
Bluetooth
®
.
Current track number out of total number of tracks in the playlist (if available)
Elapsed time
so
Track duration
.
3
Tabla de contenido
loading

Tabla de contenido