Tabla de contenido
Technical characteristics and utilization limits of power pack:
- Input: 230 V ac, 50 Hz
- Output: 5 Vdc, 3A
- Type of protection: IP 65
- Safety brands: CE
B - CONTROL UNIT can only be installed in zone 2, 3
D - LIGHT CONTROL BUTTON can be installed in zones 1, 2, 3
C - FAIRLEAD CONDUIT linked to zones 1, 2
RGB CABLE - B
Maximum length: 3,5 meters
Poles: 4
CABLE B - D
Maximum length : 2,5 meters
Poles: 6
Degree of protection - lamps: IPX5
Degree of protection - contacts: IPX4
Possibility of placing 1 to 4 RGB lamps on pushbutton.
The RGB lamp control is carried out using a pushbutton with backlight
By PRESSING the button ONCE the led
switches on in automatic mode.
By PRESSING TWICE the automatic
switching stops.
By PRESSING THREE times the led
is switched off. This will also occur
automatically after 60'.
When switched on the lamp is
activated with a white light.
Every 60" the sequence is as follows:
WHITE
YELLOW
RED
GREEN
BLUE
PURPLE
Then the cycle starts again.
42
TECHNICAL FEATURES OF THE ELECTRICAL SYSTEM
FUNCTION OF RGB SPOTLIGHT CONTROL
Tabla de contenido
