Sefa ROTEX V3 Serie Guia Del Usuario página 9

c� Selecting a working direction
This press is fitted as standard with a lower platen mount that pivots through 180° so
that you can thread the workpieces on from the front or back.
To fit the mount the other way:
- Undo the 2 thumbscrews between the mount and the lower platen.
- Turn the mount around 180°.
- Tighten the 2 thumbscrews underneath the lower platen
d� Setting the height of the heat platen
The pressure applied by the heat platen can be altered to suit operator requirements.
The cold platen can also be fully lowered to leave a gap between the two platens (maxi-
mum distance in the working position: 17mm).
1.
2.
3.
4.
5.
Adjustment wheel
e� Changing the work platen
There are two placement guides on the underside of the lower platen to place your
hands on and make the platen easier to lift off for changing.
Lockpin
www.sefa.fr
180 ° Rotation
Release the latch.
Turn the adjustment wheel clockwise to lower the heat platen (and in
crease the pressing force).
Turn the other way to reduce the pressure.
An optional position indicator shows the height and therefore the
pressure setting.
Re-attach the latch once the pressure has been adjusted.
User guide - SEFA ROTEX V3 Series
Thumbscrews
Placement guides
Latch
9