Bosch AL 2425 DV Manual Original página 7

OBJ_BUCH-684-004.book Page 7 Monday, January 20, 2014 8:56 AM
 Before each use, check the battery charger, cable and
plug. If damage is detected, do not use the battery
charger. Never open the battery charger yourself.
Have repairs performed only by a qualified technician
and only using original spare parts. Damaged battery
chargers, cables and plugs increase the risk of an electric
shock.
 Under abusive conditions, liquid may be ejected from
the battery; avoid contact. If contact accidentally oc-
curs, flush with water. If liquid contacts eyes, addition-
ally seek medical help. Liquid ejected from the battery
may cause irritations or burns.
 Do not cover off the ventilation slots of the battery
charger. Otherwise, the battery charger can overheat and
no longer operate properly.
Products sold in GB only: Your product is fitted with a
BS 1363/A approved electric plug with internal fuse (ASTA
approved to BS 1362).
If the plug is not suitable for your socket outlets, it should be
cut off and an appropriate plug fitted in its place by an author-
ised customer service agent. The replacement plug should
have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains sock-
et elsewhere.
Product Features
The numbering of the product features refers to the illustra-
tion of the battery charger on the graphics page.
1 Battery without contact APT*
2 Unlocking button for adapter*
3 Adapter for battery without contact APT*
4 Green battery charge indicator
5 Charging compartment
6 Battery with contact APT*
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.
Technical Data
Battery Charger
Article number
Output voltage (automatic voltage
detection)
Charging current
– Rapid charging
– Trickle charging
Allowable charging temperature
range
Please observe the article number on the type plate of your battery
charger. The trade names of individual battery chargers may vary.
Bosch Power Tools
Battery Charger
Charging time for battery capacity,
approx.
– 1.2 Ah
– 1.4 Ah
– 1.7 Ah
– 2.0 Ah
– 3.0 Ah
Number of battery cells
Weight according to
EPTA-Procedure 01/2003
Protection class
Please observe the article number on the type plate of your battery
charger. The trade names of individual battery chargers may vary.
Operation
Starting Operation
 Observe the mains voltage! The voltage of the power
supply must correspond with the data given on the name-
plate of the battery charger. Battery chargers marked with
230 V can also be operated with 220 V.
Charging Procedure
The charging procedure starts as soon as the mains plug of
the battery charger is plugged into the socket outlet and the
battery 6 is inserted into the charging compartment 5.
For charging Bosch batteries without contact APT 1, use
adapter 3.
To remove the adapter 3 from the charging compartment 5,
press release button 2.
Due to the intelligent charging method, the charging condi-
tion of the battery is automatically detected and the battery is
charged with the optimum charging current, depending on
battery temperature and voltage.
This gives longer life to the battery and always leaves it fully
charged when kept in the charger for storage.
Note: The charging procedure is only possible when the bat-
tery temperature is within the allowable charging tempera-
ture range, see Section "Technical Data".
AL 2425 DV
2 607 224 ...
Meaning of the Indication Elements
Flashing Battery Charge Indicator 4
V 7.2 – 24
mA 2500
mA 100
Continuous Lighting of the Battery Charge Indicator 4
°C 0 – 45
in the allowable charging temperature range, and cannot be
charged for this reason. The battery is charged as soon as the
allowable charging temperature range is reached.
English | 7
AL 2425 DV
min
min
min
min
min
kg
The charging procedure is signalled by a
flashing battery charge indicator 4.
Continuous lighting of the battery
charge indicator 4 indicates that the
battery is fully charged or that the
temperature of the battery is not with-
1 609 929 0HC | (20.1.14)
36
41
50
58
90
6 – 20
0.6
/ II