ardistel A3-23616-D Manual De Instrucciones página 8

4. CHARGING THE CONTROLLER
• In order to charge the battery from the controller, plug one side of the USB-miniUSB included
cable into the miniUSB plug from the controller, and the other side to a free USB slot in your PS3™
system. NOTE: You must power on the PS3™ system to make it work; with the system powered
off, the controller will not charge even with the USB cable plugged.
• During the charging process, all 4 player LED indicators in the controller will flash to indicate
that the charging process has started.
• The controller will be fully charged once the LED indicators stop flashing and remain still.
• When the battery pack power is too low, one of the LED indicators will start flashing slowly in
order to indicate that you need to recharge the battery pack.
• You can play and charge simultaneously, but we recommend you not to use the controller
during the charging process in order to fully and charge in a faster way the battery pack.
Important: DO NOT USE CHARGERS THAT AREN'T serviceable and approved parts from Ardistel,
because it may damage the device and the warranty will be automatically cancelled. The
warranty will not be applied to products provided by other suppliers or if as a result of a misuse
you damage the product. For the first charge please charge the controller for 3-4h. We
recommend to charge the battery when completely exhausted.
5. AUTOMATIC POWER OFF & SLEEP FUNCTION
If you do not use the controller for about 5 minutes it will go into Sleep mode to save energy. In
order to activate the controller press HOME and you will be able to use it again.
When the power energy level from the batteries is low, one of the LED indicators from the player
number will flash slowly indicating that you must change the batteries (check section 4 from this
manual).
6. WARNINGS AND SAFETY MEASURES
In order to make sure that the controller works properly, please follow the instructions below
strictly and do not misuse the product, keeping in mind the following warnings:
6.1. General Warnings
• If you cannot link the controller, turn it off. Just press and hold HOME button on the controller
while you are in the PS3™ main menu, an Options menu will pop up. Select "Turn Off Controller"
and confirm. Connect again the USB cable to the controller and to the system, and press the
HOME button to re-link it again.
• Check that the energy level from the battery pack is enough. A low level may cause anomalous
functioning in the controller.
• Do not throw the controller or its accessories into water, fire or drop them.
• Keep the device away in a dry and safe place. Do not expose to direct sun light.
• Do not use or expose the device to high or low temperatures (extreme hot/cold conditions or
high levels of moisture). Not paying attention to this warning may damage the product and/or
the battery.
• Keep the controller and its components in a safe and clean place. Quick oscillations or dropping
the controller into hard surfaces may damage the device and/or its components.
• For product general cleaning, carefully wipe the controller with a damp & clean cloth. Avoid
putting a lot of pressure on the buttons or the surface of the controller.
• Do not let the controller powered on when you are not using it. Just press and hold HOME
button on the controller while you are in the PS3™ main menu, an Options menu will pop up.
Select "Turn Off Controller".
• If you are not going to use the product for a long time turn off the controller and keep it in a dry
8