Tabla de contenido
Idiomas disponibles
Idiomas disponibles
1. Power switch / Mute
1) Press PWR button to turn on the unit. Press again to turn off the unit.
2) When unit is on, press and hold PWR/MUTE Button to mute the volume. Press again to
recover to previous volume level.
2. Mode button
1) Plug in USB/SD/MMC Card under radio mode, this unit will change to USB/SD/MMC card
mode;
2) Plug in SD/MMC card under USB mode, this unit will change to SD/MMC card mode;
3) Plug in USB under SD/MMC card mode, this unit will change to USB mode.
4) This unit will change to radio mode when USB/SD/MMC card is removed.
5) Press MOD button to change the mode when USB/SD/MMC card is plugged in. USB mode is
preseted when switching on the unit.
3. Time display and setting
1) Time will be displayed after slightly press the CLK button.
The LCD display will return back to its original display after 5 seconds.
2) Press and hold CLK button to set the time, time on the display will be blinking. Then slightly
rotate the rotary knob or VOL-/VOL+ on the remote control to set the hour. Press SEL to
confirm the hour setting.
3) Then rotate the rotary knob or VOL-/VOL+ on remote control again to set the minute. To
confirm the time setting, simply by pressing SEL button.
4. Audio mode selector
1) Rotate audio mode selector to increase/decrease the volume level.
2) Press audio mode selector, "VOL, BAS, TRE, BAL, FAD, LOUD, EQ, DX, ST" on the display,
then rotate the audio mode selector to increase/decrease the volume, bass, treble, balance,
fader, loud on/off, EQ, DX/LOC, stereo/mono.
3) To activate the EQ function from the unit, rotate the volume knob selector until EQ is found on
the display; then rotate the volume knob to select your desired EQ mode: "POP-CLASS-
ROCK-EQ OFF".
4) To activate the EQ function from the remote control, simply by pressing EQ on the remote;
then "EQ" will be found on the LCD display, then press EQ button again to select your desired
EQ mode: "POP-CLASS-ROCK-EQ OFF".
Note: If EQ is on, unit will not be able to control BASS & TREBLE function.
Radio Control
1. Band Control
1) Press BND button to select the band, repeatedly to cycle through 5 radio band:
FM1 – FM2 – FM3 – AM1 – AM2
2) Hold and press APS button, the radio will scan up all the strongest station and preset
automatically in 1-6 number keys.
In FM mode, 18 stations can be stored from FM1-FM3 mode;
In AM mode, 12 stations can be stored from AM1-AM2 mode.
Press any number button to enjoy the stored station.
2. Tuning Button
Press
P-4
to auto tune the desire radio station, press and hold the button again, manual
Tabla de contenido
