Wall Track Installation - OVE CLARK Manual Del Usuario

1. Level the track (B) and mark the track holes' positions.
2. Remove the track and drill pilot holes in the marked locations with a ø5/16" (8mm) drill bit.
3. Insert the wall anchors (AA) using a rubber mallet until the wall anchors are flush with the wall.
4. Replace and secure the track (B) with screws (CC). Do not overtighten.
Helpful Hint
Make sure there
is a support stud
located behind the
drywall, behind the
tracks!

WALL TRACK INSTALLATION

Tub edge
Helpful Hint
Do not overtighten!
This may crack the
acrylic or tile walls.
8
1
B
2
ø5/16"
8mm
3
AA
4
CC