POLTI Vaporetto VT SMART 40-MOP Manual De Instrucciones página 23

plug, in water or other liquids.
• Steam must not be directed towards equipment containing
electric or electronic components.
RISKS DURING USE OF THE PRODUCT – INJURIES/SCALDING
• The product should not be used in areas where there is a dan-
ger of explosions or in the presence of toxic substances.
• Do not pour toxic substances, acids, solvents, detergents,
corrosive substances and/or explosives or perfumes into the
boiler.
• Only pour water or the water mix indicated in the Chapter
"WHICH WATER TO USE" into the boiler.
• Do not direct the steam jet onto toxic substances, acids, sol-
vents, detergents or corrosive substances. The handling and
removal of dangerous substances must be carried out accor-
ding to the indications of the manufacturers of these substan-
ces.
• Do not direct the steam jet onto explosive powders or liquids,
hydrocarbons, open flames and or extremely hot objects.
• Do not position the product near sources of heat such as fire-
places, stoves and ovens.
• Do not obstruct the openings and grills on the product.
• Do not direct the steam jet on any part of the body of people
or animals.
• Do not direct the steam jet on clothes while they are being
worn.
• Cloths and rags and fabrics which have been subjected to a
deep steam reach very high temperatures, above 100°C. Wait
a few minutes and check that they have cooled before hand-
ling them. Therefore, avoid contact with the skin if they have
just been steamed.
• The steam lock on the handle guarantees greater safety, as it
prevents the accidental activation of steam delivery by chil-
dren or people who are unaware of the function of the ap-
| 23 |