Tabla de contenido
Idiomas disponibles
Idiomas disponibles
TROUBLE SHOOTING
PROBLEM
Does not turn on
remote control
The dron can not be
control
The dron is not
elevates
The dron lands
too
soon
SPECIFICATIONS
Specifications are subject to change without notice.
Drone input: 3.7 V - - -
Remote control input: 6 V - - - (4 x AA)
Frequency: 2.4 GHz
Battery: 3.7 V - - - 200 mAh
PROBABLE REASON
It is in position
OFF
Batteries are not
correctly.
Batteries have no charge
The remote control is not
switched on
The dron battery is not
well connected
There is a lot of wind
The dron pairing
with control is not successful
The speed of rotation
It's too slow
Charging the dron battery
it is low
The throttle lever
low too fast.
SOLUTION
Turn the ON / OFF switch
to the ON position.
Check that the
batteries are
placed according to
polarity shown on the
compartment
the batteries.
Replace
batteries.
Turn the ON / OFF switch
to the ON position.
Connect the dron battery
In the correct orientation.
Do not operate the dron
in weather rainy or by
much wind.
Perform the
pairing.
Push the acceleration
control towards
above.
Charge the battery of the
dron or replace with a
new
Lower the lever slowly
to make a landing
soft.
15
Capítulos
Tabla de contenido
