Specific Safety Rules And Symbols - Flex CL 2000 18.0 Instrucciones De Funcionamiento

Instruction manual

SPECIFIC SAFETY RULES AND SYMBOLS

1. Safety warnings for rechargeable
LED work light operation
(a) This power tool is intended to function
as a rechargeable LED work light. Read all
safety warnings, instructions, illustrations
and specifications provided with this power
tool.
Failure to follow all instructions listed below
may result in electric shock, fire and/or
serious injury.
2. Additional warnings
(a) The mains voltage and the voltage
specifications on the rating plate must
correspond.
(b) Only FLEX AUTHORIZED SERVICE
CENTER should disassemble or assemble
this power tool, and only genuine FLEX
replacement parts should be installed.
(c) Clean the exterior of the power tool only
with a soft cloth moistened with soapy
water, and dry thoroughly.
(d) Never use solvents, gasoline or thinners
on plastic components; otherwise the
plastic may dissolve.
(e) The light source contained in this luminaire
shall only be replaced by the manufacturer or
his service agent or a similar qualified person.
6
SAVE THESE INSTRUCTIONS
3. Definitions for symbols used on
this tool
V volts
r.p.m. Rotation rate
Before switching on the power
tool, read the operating manual!
Do not look into the light source!
Dust-proof degree 5 and
protection against ingress of
water 4
CL 2000 18.0