Connections - Nevir NVR-7502-20HD-N Manual De Instrucciones

Getting Started

Connections

Connector
SIDE AV
SIDE AV
HEADPHONE
NOTE: When connecting a device via the YPbPr or Side AV input, you must use the supplied connection cables
to enable connection. See the illustrations above. | You can use YPbPr to VGA cable (not supplied) to enable YPbPr
signal via VGA input. |You cannot use VGA and YPbPr at the same time. | To enable PC audio, you will need to use the
SIDE AV CONNECTION cable's WHITE & RED inputs. | If an external device is connected via the SCART socket, the TV
will automatically switch to AV mode.| When receiving DTV channels (Mpeg4 H.264) or while in Media Browser mode,
output will not be available via the scart socket. | When using the wall mounting kit (optional), we recommend that you plug
all your cables into the back of the TV before mounting on the wall. | Insert or remove the CI module only when the TV is
SWITCHED OFF. You should refer to the module instruction manual for details of the settings.
Type Cables
Scart
Connection
(back)
VGA
Connection
(back)
PC/YPbPr
Audio
Connection
Side Audio
(side)
YPbPr or PC Connection Cable
(Not supplied)
HDMI
Connection
(back)
SPDIFF
Connection
(back)
Side AV
(Audio/Video)
Connection
(side)
Headphone
Connection
(side)
YPbPr Video
Connection
(back)
PC to YPbPr Connection Cable (Not supplied)
USB
Connection
(side)
CI
Connection
(side)
English - 20 -
(Not supplied)
Device