instruction manual
operAtion - general
The waffle maker is intended only for domestic use, not for professional use.
1.
6.
5.
1. Housing
2. Baking plates
3. "Power" pilot light
operAtion - using for the first time
1. Remove the packaging.
2. Clean the baking plates to remove any residues that may be left from the manufacturing process (see
"Cleaning and maintenance"). Dry them thoroughly.
3. Put the plug into the wall socket and allow the waffle maker to heat up. This will take about 10 minutes;
allowing it to heat will remove any packaging odour from the appliance.
•
The appliance may emit a little smoke and a characteristic smell when you switch it on for the first
time. This is normal, and will soon stop. Make sure the appliance has sufficient ventilation.
•
Keep house birds away from the appliance when it is in use. Fumes released from the non-stick
coating when the baking plates are hot may be harmful to birds.
operAtion - preheating
1. Put the plug into the wall socket. The pilot lights will illuminate, and the appliance will begin to heat up.
2. Wait until the green pilot light is out. The baking plates are now at the correct temperature and the waffle
maker is ready for use. This will take approximately 3 minutes.
4. "At temperature" pilot light
5. Handle
6. Closure
23
3.
4.
2.