Cleaning The System; Changing And Clearing The Needle - Coravin SmartClamps Manual De Usuario

CLEANING
THE SYSTEM
Clean Coravin System after each use.
Rinse Spout, SmartClamps™ and Needle
1
Guide with warm, clean water. Ensure
SmartClamps™ move up and down with
ease.
IMPORTANT: Never press Trigger while
rinsing Spout. This may damage System.
Remove from water and dry thoroughly
2
with a soft cloth.
Quickly PRESS AND RELEASE Trigger to
3
clear any excess water.
TIPS
Do not submerge System in water or any other liquids. It is not dishwasher safe. Do
not use abrasive cleaners or scouring pads that can scratch exterior surface.
If after cleaning System, it feels sticky or clogged, repeat cleaning procedure using
a 50/50 mixture of water and white vinegar. This is especially helpful after accessing
dessert wines.
Do not let wine dry on System. Clean immediately after use.
1
11
CHANGING AND CLEARING
Start with SmartClamps™ in down
1
position. Grasp Needle Grip, located at
top of Needle, and unscrew to release
from System. Needle drops down
quickly.
Tilt Needle slightly and pull it up and
2
away from System to remove.
If installing a new Needle, carefully
3
remove Needle Guard. Place Guard onto
old Needle and dispose according to
local regulations.
If existing Needle is clogged, use Needle
4
Clearing Tool to poke cork/sediment
through eye of Needle.
Hold new Needle by Needle Grip and
5
slide pointed end back into Needle
Guide, slightly tilting Needle.
Screw Needle Grip back into System
6
until fully tightened.
CAUTION: Needles are sharp.
Handle with care.
THE NEEDLE
1
1
2
2
4
For how-to videos, visit
12
Coravin.com/start