Q Acoustics Q B12 Manual Del Usuario página 3

Important Safety Information and Warnings
IMPORTANT INFORMATION - PLEASE READ CAREFULLY
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK)
NO USER-REMOVABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED PERSONNEL
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings.
Install in accordance
instructions.
Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
Do not defeat the safety purpose of the polarized or
grounding type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug
has two blades and a third grounding prong. The wider
blade or the third prong are provided for your safety. If
the provided plug does not fit into your outlet, consult an
electrician for replacement of the obsolete outlet.
Protect the power cord from being walked on or
pinched, particularly at plugs, convenience receptacles,
and the point where they exit from the apparatus.
Use only attachments/accessories specified by the
manufacturer. Use only with a cart, stand, tripod,
bracket, or table specified by the manufacturer, or sold
with the apparatus.
When a cart is used, use caution when moving the cart/
apparatus combination to avoid injury from tip-over.
Unplug this apparatus during lightning
storms or when unused for long periods of
time.
Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power supply cord or
plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally,
or has been dropped.
Warning: To reduce the risk of fire or electrical shock, do
not expose this product to rain or moisture. The product
must not be exposed to dripping and splashing and
no object filled with liquids such as a vase of flowers
should be placed on the product.
No naked flame sources such as candles should be
placed on the product.
with the manufacturer's
This symbol indicates that there are important
operating and maintenance instructions in the
literature accompanying this unit.
This symbol indicates that dangerous voltage
constituting a risk of electric shock is present
within this unit.
Warning: The mains power switch for the subwoofer is
the device used to disconnect the unit from the mains
supply. This switch is located on the rear panel. To
permit free access to this switch, the apparatus must be
located in an open area without any obstructions, and
the switch must be freely operable.
Caution: Changes or modifications not expressly
approved by the manufacturer could void the user's
authority to operate this device.
Service: Equipment for servicing should be returned
to the supplying dealer, or to the service agent for your
area. The addresses of the main Service Agents for the
UK are listed in this manual.
Third parties: In the unlikely event that you pass this
product on to a third party, include these operating
instructions with the product.
Important notice to UK users
The appliance cord is terminated with a UK approved
mains plug fitted with a 3A fuse. If the fuse needs to be
replaced, an ASTA or BSI approved BS1362 fuse rated
at 3A must be used. If you need to change the mains
plug, remove the fuse and dispose of this plug safely
immediately after cutting it from the cord.
Connecting a mains plug
The wires in the mains lead are coloured in accordance
with the code: Blue: NEUTRAL; Brown: LIVE.
As these colours may not correspond to the coloured
markings identifying the terminals in your plug, proceed
as follows:
The BLUE wire must be connected to the terminal
marked with the letter N or coloured BLUE or BLACK.
The BROWN wire must be connected to the terminal
marked with the letter L
or coloured BROWN or
RED.
To completely disconnect
this apparatus from the
AC Mains, disconnect the
power supply cord plug
from the AC receptacle.
Where the MAINS plug or
an appliance coupler is used as the disconnect device,
the disconnect device shall remain readily operable.
3