Wahl 4340 Manual De Uso página 14

E N G L I S H
4. Select the required temperature setting.
Switch for temperature settings:
0
Temperature setting 0, for cold air
I Temperature setting 1, for hot air
II Temperature setting 2, for hotter air
Cold shot button:
By pressing and holding the cold button, the hairdryer can
be switched to cold air for short periods. To return to the set
de
temperature, simply release the cold-shot button.
en
5. Using the on/off switch, switch off the hairdryer after use.
fr
Operation
it
Styling with the nozzle
The nozzle can be used to direct the airflow onto the styling brush.
es
1. Position the nozzle and press it towards the housing (Fig.2ⓐ).
pt
2. You can remove the nozzle simply by pulling it off in the direction
of the arrow (Fig. 2ⓑ).
nl
TOURMALINE coating
da
Negative ions have an antistatic effect and are gentle to the hair. They
close the scale layer, creating a smooth, silky hair surface. They lock in
sv
the natural moisture of the hair, thereby creating the ultimate shine.
no
Overheat protection
The hairdryer is fitted with an overheat protection facility. Should the
fi
appliance overheat, the heating process is interrupted and only cold air
flows out. After the appliance has cooled down, the heating element
tr
will switch on again automatically.
pl
Maintenance
cs
Warning! Injuries and material damage due to incorrect
handling.
sk
f Switch off the hairdryer before cleaning it or performing
any maintenance. Disconnect the hairdryer from the
hr
power supply.
f Allow the hairdryer to cool down completely.
hu
Cleaning and care
sl
Danger! Electric shock due to penetration of liquid.
f Never immerse the hairdryer in water!
ro
f Do not allow any liquid to get inside the appliance.
bg
Caution! Danger from aggressive chemicals.
Aggressive chemicals could damage the hairdryer and
ru
accessories.
f Never use solvents or scouring agents.
uk
f Only wipe the hairdryer with a soft, slightly damp cloth.
f To maintain the performance of your hairdryer, regularly clean the
et
air inlet with a soft dry brush.
lv
Proceed as follows:
1. Twist the cover in an anti-clockwise direction (Fig. 3ⓐ) and
lt
remove.
el
14
ar
2. Clean the cover and air inlet with a soft brush (Fig. 4).
3. Replace the cover and twist it in a clockwise direction until it clicks
into position (Fig. 3ⓑ).
Problem elimination
Hairdryer only runs with cold air
Cause: The overheat protection is active.
f Allow the hairdryer to cool down.
f Clean the air inlet.
Hairdryer is not working
Cause: Defective power supply.
f Make sure that contact between the mains and the socket is fault-
less. Check the mains cable for possible damage.
In the event that this information does not help you resolve your
problem, please contact our service centre. Never attempt to repair the
appliance yourself!
Disposal
Caution! Environmental damage in the case of incorrect
disposal.
f Correct disposal will ensure environmental protection
and prevent any potentially harmful impacts on people
and the environment.
Adhere to the relevant legal requirements when disposing of the
appliance.
Information on the disposal of electrical and electronic appliances
in the European Union:
Within the European Union, national regulations are speci-
fied for the disposal of electrical appliances based on EU
Waste Electrical and Electronic Equipment Directive 2012/19/
EU (WEEE). In accordance with this, the appliance can no
longer be disposed of with the local or domestic waste. The
appliance will be accepted free of charge by local collection
points or recycling centres. The packaging for this product is
made from recyclable materials. Dispose of this in an envi-
ronmentally friendly manner by recycling it.