Idiomas disponibles
Idiomas disponibles
OPERATION.
1. Before plugging in, check that it is turned off.
2. Plug the fan into the electric current.
3. Stretch the entire cable. Make sure the cable is not tense.
4. Turn on the fan by selecting the desired speed.
(0) Off. (1) Low speed. (2) Average speed. (3) High speed.
5. To swing the fan from side to side, press the oscillation button (10) down,
located above the engine.
6. To keep the fan in a fixed position, raise the oscillation button (10).
7. To turn off the fan select "zero" and unplug.
Note.
Never leave the fan plugged in if you are not using it.
CLEANING AND MAINTENANCE.
- Always unplug the fan before cleaning.
- Keep the fan always clean, dusting regularly.
- Remove the front grille, clean the blade with a damp cloth and dry thoroughly.
- Remove dust from the grilles and mount the front grille.
- Clean everything else with a slightly damp cloth and dry thoroughly.
- Use water with neutral soap to moisten the cloth.
- Never use abrasive cleaning products.
- Store in a cool, dry area and where there is no dust or dirt.
- If possible, disassemble and store in its box.
- If you want to storage it mounted, cover whole with sheet or plastic.
- Do not stack anything on top of the fan.
SPECIFICATIONS.
