SmartGyro Ziro 2 Manual Del Usuario página 29

Assembling your smartGyro Ziro 2:
1. Install the brakes to correct position with the Hex Wrench M5
2. Install the handlebars, pay attention to the installation direction.
3. Hold the scooter, lift the handle up until it is locked to lock the
structure
4. Install the handlebar on the
vertical tube.
Buckle
Buckle
5. Use the M3 hex wrench to lock the
M3X4 screws on both sides of the
vertical tube as shown in the following
image
Ziro 2- Manual
3. Hold the scooter,
lift the handle up until
it is locked to lock the
structure
2. To fold it press the
buckle while lowering
the lever
smartgyro.es
28