Connections - Sharp Pn-L703B Manual De Instalación

Caution
• Be sure to turn off the main power switch and disconnect the plug from the power outlet before connecting/disconnecting
cables. Also, read the manual of the equipment to be connected.
• Be careful not to confuse the input terminal with the output terminal when connecting cables. Accidentally reversing cables
connected to the input and output terminals may cause malfunctions and the other problems.
1
2
3
For power outlet
TIPS
• Set the audio input terminal to be used in each input mode in AUDIO SELECT on the SETUP menu. The factory settings are
shown below.
Input mode
D-SUB1
D-SUB2
DisplayPort
HDMI1
HDMI2
HDMI3
• To use a touch panel, the touch panel must be connected to the computer, and Touch Panel Settings Tool and Pen Software
must be installed on the computer from the provided CD-ROM.
To install the software, see the manual for each.
• To use a touch panel with a computer connected to the bottom, connect to the USB 1 port.
To use a touch panel with a computer connected to the side, connect to the USB 2 port.
(Factory setting. Can be changed in TOUCH INPUT SELECT in the SETUP menu.)
• The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks
of HDMI Licensing LLC in the United States and other countries.
• DisplayPort is a registered trademark of Video Electronics Standards Association.
6
E

Connections

4 5 6 7 8 9
Audio input terminal (Factory setting)
Audio1 input terminal
Audio2 input terminal
DisplayPort input terminal
HDMI 1 input terminal
HDMI 2 input terminal
HDMI 3 input terminal
1. AC input terminal
2. Power cord (Supplied)
3. External speaker terminals
13
4. Audio output terminal
5. DisplayPort output terminal
14
6. Touch pen adapter port
7. USB 1 port
8. LAN terminal
15
9. D-sub 1 input terminal
16
10. DisplayPort input terminal
11. HDMI 1 input terminal
17
12. Audio 1 input terminal
13. USB 2 port
14. D-sub 2 input terminal
15. HDMI 2 input terminal
16. HDMI 3 input terminal
17. Audio 2 input terminal
10 11 12