Set The Operating Temperature; Manual Defrost; Cleaning, Care & Maintenance - Polar Refrigeration G590 Manual De Instrucciones

UK
Operation
Turn On
Ensure the power switch is set to [O] and turn on at the socket.
1.
Switch on the Power [I]. The current temperature within the appliance is displayed.
2.
l
Control Pane
To unlock / Lock the keyboard press

Set the Operating Temperature

Press the button. The display will flash.
1.
Press the or buttons to display the required temperature.
2.
Press the button to store the temperature.
3.

Manual Defrost

Press and hold the defrost button 'aux' for 2 seconds to begin a manual defrost. The defrost light illuminates.
Cleaning, Care & Maintenance
• Defrost appliance at least every 3 months, more often if required
• Switch off and disconnect from the power supply before cleaning.
• Clean the interior of the appliance as often as possible.
• Do not use abrasive cleaning agents. These can leave harmful residues.
• Clean the door seal with water only.
• Always wipe dry after cleaning.
• Do not allow water used in cleaning to run through the drain hole into the evaporation pan.
• Take care when cleaning the rear of the appliance. Sharp edges can cut.
• A POLAR agent or qualified technician must carry out repairs if required.
Stainless Steel Care.
To maintain the stainless steel exterior of your Polar item, please consider the following information:
Never:
• Use abrasive Scourers or scrubbing pads etc
• Use Chlorinated or acidic detergents
• Allow anything e.g. food, dirt, cleaning chemicals to remain on the surface for longer than necessary, clean them off right away.
• Allow the surface to remain wet.
Do:
• Clean often.
• Use soft Cloths or plastic Scourers.
• Rub with the grain of the metal, rather than across it.
• Use detergents and polish designed for cleaning Stainless Steel.
• Ensure that the cleaning products are washed off fully and that the steel is left dry.
4
and together for 3 seconds. Display will flash PON (unlocked) / POF (locked)