Purpose Of Use; Work Area Safety - Beta 1930HLA Manual De Uso E Instrucciones

OPERATION MANUAL AND INSTRUCTIONS
ISTRUZIONI PER L'USO
OPERATION MANUAL AND INSTRUCTIONS FOR REVERSIBLE IMPACT WRENCH MANUFACTURED BY:
BETA UTENSILI S.P.A.
Via A. Volta 18,
20845, Sovico (MB)
ITALY
Original documentation drawn up in ITALIAN.
CAUTION
Store the safety instructions with care and hand them over to the users.

PURPOSE OF USE

- The air impact wrench can be used for the following purposes:
• assembling threaded connecting parts
• screwing and unscrewing by means of impact sockets
• the impact wrench can also be used in open places exposed to water and air
- The air impact wrench must not be used for the following operations:
• the impact wrench must not be used with any hand sockets
• the impact wrench must not be used with any couplers or extensions, because these result in reduced power
of the impact wrench and increased risk of breakage
• the impact wrench must not be used in environments containing potentially explosive atmospheres
• the trigger must not be locked with adhesive tape or clamps

WORK AREA SAFETY

• Beware of both surfaces that may become slippery due to the use of the machine and the danger of tripping over the air hose.
• While using the pneumatic tool for jobs performed high from the ground, take all necessary precautions, to eliminate or
minimize risk to other workers, following the accidental falling of any tools (for example, isolation of the work area and proper
signs).
Do not operate the pneumatic tool in environments containing potentially explosive atmospheres, because sparks may
be generated, which can ignite the dust or fumes.
Avoid contact with live equipment: the pneumatic tool is not insulated, and contact with live parts can cause electric
shocks.
Keep children and bystanders away from your workplace while operating the pneumatic tool. Distractions from other
people can cause you to lose control over the pneumatic tool.
PNEUMATIC TOOL SAFETY
• Do not point the air flow to yourself or other people. Compressed air can cause serious injury.
• Check the connections and the air supply lines. All units, couplers and hoses should conform to the product specifications in
terms of pressure and air volume. Too low pressure impairs the function of the pneumatic tool; too high pressure can cause
damage and/or injury.
• Do not bend or tighten any hoses; avoid using solvents and sharp edges. Keep the hoses away from heat, oil and rotating
parts. Immediately replace any damaged hose. A defective feed pipe may cause uncontrolled movements of the compressed
air pipe. Raised dust or chips may cause eye injury. Make sure that the hose clamps are always secured firmly.
8
1" REVERSIBLE IMPACT WRENCH ITEM 1930HLA
IMPORTANT! READ THIS MANUAL THOROUGHLY BEFORE USING
THE PNEUMATIC TOOL. FAILURE TO COMPLY WITH THE SAFETY
STANDARDS AND OPERATING INSTRUCTIONS MAY RESULT IN
SERIOUS INJURY.
GB I