Wet Vacuum Operation - EWT CS 5 COMFORT Manual De Instrucciones

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

WET – VACUUM OPERATION
1
6
BEFORE YOU START
WARNING!
You must first read and understand the section on "precautions and
guidelines regarding safety" and take them into account.
Guidelines: Never vacuum dangerous substances.
1.
Make sure the appliance is not plugged into the mains. Check that the container is clean and dust free
(Fig. 1).
2.
Remove the dust bag and the cartridge filter. Leave only the foam filter on the filter housing. Replace
the upper part of the container and close the container clasps (Fig. 2).
DO NOT USE a cartridge filter for vacuuming liquids
3.
Insert the largest end of the hosepipe into the suction port on the front of the container and lock it by
turning it to the right. Select the desired nozzle or the extension(s) and fit them onto the hosepipe
(Fig. 3).
4.
Make sure the Stop/Start switch on the appliance is in the "Stop" position ("O" position) before
plugging into the mains (Fig. 4).
5.
Start the motor (Start/Stop switch in the "Start" position ("I" position) (Fig. 5).
When you have finished vacuuming, stop the motor by putting the Start/Stop switch in the "Stop"
position ("O" position). Unplug from the mains.
6.
After use, open the drain plug, empty the container and dry it.
2
3
4
39
5
Tabla de contenido

Solución de problemas

loading

Tabla de contenido