Maytag SD-2 Manual De Usuario página 6

Controls at a Glance
Step 5
Press Start
Push this button to start the dryer. The
dryer door must be shut for the dryer to
operate. If the door is opened during the
cycle, the Start button must be pushed
again to resume the cycle once the door
is closed.
Check the Moisture Sensor...
Indicator lights in the moisture sensor will display
when an IntelliDry cycle is in operation. The top light
will blink on and off. As loads dry, there will be longer
pauses between each blink. No lights will display dur-
ing Time Dry.
The bottom light in the monitor will remain on until the
cool down portion of the cycle starts. During cool down
the dryer continues to tumble the load in unheated air
to help minimize wrinkling.
5
cont.
NOTE: The dial can be turned in either direction to
select a cycle. Once started, the dial will not advance
at a specific rate during the IntelliDry cycles. At first
the dial may not advance at all. Toward the end of the
cycle (when the load begins to dry) the dial will
advance at a more regular rate and much more quick-
ly. This is normal operation.
NOTE: The top sensor
light may not blink when
small loads of heavy,
bulky items are dried,
such as large rugs or
sweaters.