Troubleshooting Guide - Masterbuilt MB20077618 Manual De Instrucciones

ÉTEINT
APAGADO
Step 1: Plug power cord into an outlet. Refer to "General Warnings & Safety Information" section of
manual.
Step 2: Turn dial to set temperature. Ready light will turn off when unit has reached set temperature and is
ready for use.
Step 3: When cooking time has elapsed, and food is done, turn dial to OFF and unplug power cord from
outlet.
* Allow excess grease to drain into drip cup.
Symptom
Ready light won't come on
Unit takes excessive amount of time
to heat up
Grease is leaking out of smoker
No smoke
Temperature rapidly decreased, or
shut down, after few hours of use
Ready light is on, unit isn't
heating
Controller does not adjust heat
OPERATING INSTRUCTIONS
OFF

TROUBLESHOOTING GUIDE

Not plugged into wall
Circuit breaker tripped
Controller malfunctioning
Unit plugged into an extension cord
Door not closed properly
Controller malfunctioning
Drip cup not in place
Excess grease or oil build-up in unit
No wood chips
Faulty control unit
Controller/unit malfunctioning
Controller/unit malfunctioning
Cause
READY
PRÊT
LISTO
Possible Solution
Check wall connection.
Make sure other appliances are not
operating on the same electrical circuit.
Check circuit breakers.
Contact Masterbuilt at 1.800.489.1581
Set unit so an extension cord does not
have to be used.
Open, then shut door firmly.
Contact Masterbuilt at 1.800.489.1581
Reposition so drip cup alignes to drain
hole in bottom of unit.
Clean unit.
Add wood chips.
Contact Masterbuilt at 1.800.489.1581
Contact Masterbuilt at 1.800.489.1581
Contact Masterbuilt at 1.800.489.1581
19