Assembly Instruction - Famastil P1121.500 Manual De Instrucciones

- 1 Grass Trimmer
- 1 Instruction manual
- 1 Warranty certificate
- 1 List of technical assistance
- 1 Cutting edge support with 2 screws and 2 washers
- 1 Safeguard cover
- 1 Safeguard cover screw
- 1 storage hook (self service) with 4 screws
01 Position motor head/axle as shown in
(FIG4), with screw fixing hole at the top
centre. (remove pre fitted screw).
Position guard with inner side, ie.
02
moulding facing you as shown in (FIG5).
03
Lower the guard over the motor head/
axle (see FIG6) and align slots as shown
in (FIG7) (note position of the tab).
Align marks on head of the unit and
04
the guard, turn the guard in a clockwise
direction. see (FIG7).
WARNING! Take great care
when doing this as the guard has
a very sharp cutting edge.
BOX CONTENT

ASSEMBLY INSTRUCTION

Remove the screw
located before fixing
the protection.
Guide
Put dow as shown
untill the position.
FIG 4
FIG 5
FIG 6
DANGER:
Sharp blade!
27