Tabla de contenido
WiFi Header
(11-pin WIFI)
(see p.2 No. 26 or p.3 No. 25)
DeskExpress Hot Plug Detection
Header
(5-pin IR1)
(see p.2 No. 27 or p.3 No. 26)
Internal Audio Connectors
(4-pin CD1)
(CD1: see p.2 No. 31 or p.3 No. 30)
Front Panel Audio Header
(9-pin HD_AUDIO1)
(see p.2 No. 30 or p.3 No. 29)
1. High Definition Audio supports Jack Sensing, but the panel wire on
the chassis must support HDA to function correctly. Please follow the
instruction in our manual and chassis manual to install your system.
2. If you use AC'97 audio panel, please install it to the front panel audio
header as below:
A. Connect Mic_IN (MIC) to MIC2_L.
B. Connect Audio_R (RIN) to OUT2_R and Audio_L (LIN) to OUT2_L.
C. Connect Ground (GND) to Ground (GND).
D. MIC_RET and OUT_RET are for HD audio panel only. You don't
need to connect them for AC'97 audio panel.
E. Enter BIOS Setup Utility. Enter Advanced Settings, and then select
Chipset Configuration. Set the Front Panel Control option from
[Auto] to [Enabled].
2 8
2 8
2 8
2 8
2 8
ASRock 4Core1600P35-WiFi+ / 4Core1600P35-WiFi Motherboard
This header supports WiFi+AP
function with ASRock
WiFi-802.11g or WiFi-802.11n
module, an easy-to-use wireless
local area network (WLAN)
adapter. It allows you to create a
wireless environment and enjoy the
convenience of wireless network
connectivity.
This header supports the Hot
Plug detection function for
ASRock DeskExpress.
This connector allows you
to receive stereo audio input
from sound sources such as
CD1
a CD-ROM, DVD-ROM, TV
tuner card, or MPEG card.
This is an interface for front
panel audio cable that allows
convenient connection and
control of audio devices.
Tabla de contenido
