RISCO Group RVCM52E Guia De Instalacion página 16

NOTE: By default the TCP/IP settings should already be defined.
7. Click Save to save the changes.
8. Select Connection. The Connection Parameters page is displayed.
Figure 18 Connection Parameters
9. Set the following port connection parameters of the camera:
TCP Port
UDP Port
HTTP Port
RTSP Port:
HTTPS Port
10. Click Save to save the changes.
11. Repeat the above steps for each camera using the relevant IP address and
alternative port number for each.
Set the TCP port you want to define for the camera (in our
example 47777).
Set the UDP port (in our example 47778)
The default port number is 80, and can be changed to any
port range 1024 to 65535 (in our example 10080).
The default port number is 554 (in our example 47554).
The default port number is 443, and can be changed to any
port range 1024 to 65535 (in our example 47443).
16