PREPARATION FOR USE
LANGUAGE SELECTION
If you want to change the language of the on-screen menu, follow the procedure below.
1) Connect the power cord to a standard AC outlet.
Note: If some digits appear in the corner of the screen, press the POWER
button without unplugging the power cord.
2) Press the POWER button to turn on the TV.
3) Press the MENU button so that the menu display appears
on the TV screen.
4) Press the CH(annel) ▲ or ▼ button to point to "[ENG]".
5) Select "ENG(lish)", "ESP(añol)" or "FRA(nçais)" by using
the VOL(ume) ▲ or ▼ button.
6) Press the MENU button to exit the menu.
CHANNEL PRESETTING
To preset a channel or to change a preset channel, follow the procedure below.
1) Press the POWER button to turn on the TV.
2) Press the MENU button so that the menu display appears
on the TV screen.
3) Press the CH(annel) ▲ or ▼ button to point to "CHANNEL SET".
Then press the VOL(ume) ▲ button.
4) Press the CH(annel) ▲ or ▼ button to point to "AUTO PRESET CH".
Then press the VOL(ume) ▲ button.
The tuner scans and memorizes all active channels in your area.
The TV distinguishes between standard TV channels and cable (CATV)
●
channels.
When AUTO PRESET CH action is completed, the lowest memorized
●
channel reappears on the screen.
When you press the CH(annel) ▲ or ▼ button after selecting "AUTO
●
PRESET CH", the tuner will stop at the memorized channels only.
The TV may memorize TV channels as CATV channels if the reception conditions are poor. If
●
this happens, try AUTO PRESET CH action again when reception conditions are better.
When AUTO PRESET CH is activated where there is no TV signal input, "NO TV SIGNALS"
●
will appear on the display after the completion of channel scanning.
[ADD/DELETE FUNCTION]
1) Press the MENU button so that the menu display appears on the TV
screen.
2) Press the CH(annel) ▲ or ▼ button to point to "CHANNEL SET".
Then press the VOL(ume) ▲ button.
OPERATIONS
WATCHING A TV PROGRAM
1) Press the POWER button to turn on the TV.
2) Select the desired channel with the CH(annel) ▲ or ▼ button.
3) Adjust the volume to the desired listening level using the VOL(ume) ▲ or ▼ button.
4) Adjust picture controls for a natural looking image (See "PICTURE ADJUSTMENT").
SETTING THE SLEEP TIMER
The sleep timer function allows you to have the POWER automatically turn
off after a set time period.
1) Press the POWER button to turn on the TV and press the SLEEP button
on the remote control .
2) You may change the sleep time by pressing the SLEEP button on the
remote control repeatedly. The timer can be set up to 90
minutes. 10 minutes each time the SLEEP button is
pressed. (The timer display counts up and sleep timer will
be displayed on the screen when you press the SLEEP
button on remote control).
Note: When you disconnect the unit from the AC outlet or when you have a power failure, the
sleep time will be lost.
CLOSED CAPTION SELECTION
You may view specially labeled (cc) TV pro-
grams, movies, news and prerecorded tapes,
etc. with either a dialogue caption or text dis-
play added to the program.
: Press the VOL(ume) ▲ or ▼ button.
PICTURE
PICTURE
CHANNEL SET
CHANNEL SET
[ENG] / ESP / FRA
[ENG] / ESP / FRA
V-CHIP SET UP
V-CHIP SET UP
CAPTION [OFF]
CAPTION [ C1]
TV SOUND [MAIN]
TV SOUND [MAIN]
PICTURE
CHANNEL SET
[ENG] / ESP / FRA
V-CHIP SET UP
CAPTION [OFF]
TV SOUND [MAIN]
PICTURE
CHANNEL SET
[ENG] / ESP / FRA
V-CHIP SET UP
CAPTION [OFF]
TV SOUND [MAIN]
PICTURE
CHANNEL SET
[ENG] / ESP / FRA
V-CHIP SET UP
CAPTION [OFF]
TV SOUND [MAIN]
ADD/DELETE
AUTO PRESET CH
PICTURE
CHANNEL SET
[ENG] / ESP / FRA
V-CHIP SET UP
CAPTION [OFF]
TV SOUND [MAIN]
To cancel the sleep timer:
Press the SLEEP button repeated-
ly until "SLEEP 0" is displayed.
1) Press the MENU button so that the menu
display appears on the TV screen.
2) Press the CH(annel) ▲ or ▼ button to point
to "CAPTION".
3) Press the VOL(ume) ▲ or ▼ button to select
the mode you wish.
4) When done, press the MENU button to exit
the menu.
PICTURE
PICTURE
CHANNEL SET
CHANNEL SET
[ENG] / ESP / FRA
[ENG] / ESP / FRA
V-CHIP SET UP
V-CHIP SET UP
CAPTION [ C2]
CAPTION [ T1]
TV SOUND [MAIN]
TV SOUND [MAIN]
3) Press the VOL(ume) ▲ button so that "ADD/DELETE" is selected.
4) Use the CH(annel) ▲ or ▼ button to select the channel you wish to put
into memory or to erase from memory.
Note: The menu will disappear automatically in about 10 seconds.
Perform "ADD/DELETE" function while this display appears on the
screen.
Press the VOL(ume) ▲ or ▼ button to highlight the channel number
●
in LIGHT BLUE if you wish to add the channel into memory.
Press the VOL(ume) ▲ or ▼ button to highlight the channel number
●
in LIGHT RED if you wish to erase the channel from memory.
5) Press the MENU button to exit the menu.
MTS (Multi-Channel Television Sound) SYSTEM
You can listen to a program in MTS stereo by following the steps below.
Menu
Menu
Selection
Selection
MAIN
MAIN
Type of
Type of
broadcast
broadcast
Regular
Regular
-None-
-None-
Stereo
Stereo
STEREO
STEREO
broadcast
broadcast
MAIN
MAIN
SAP
SAP
[To Select STEREO, MONO or SAP in Stereo broadcast]
1) Press the MENU button so that the menu display appears on the TV screen.
2) Press the CH(annel) ▲ or ▼ button to point to "TV SOUND".
3) Press the VOL(ume) ▲ or ▼ button to select your desired stereo mode
([MAIN], [MONO] or [SAP]).
: Press the VOL(ume)
PICTURE
CHANNEL SET
Type of
[ENG] / ESP / FRA
broadcast
V-CHIP SET UP
Regular
CAPTION [OFF]
TV SOUND [MAIN]
Stereo
broadcast
SAP
RESUME FUNCTION
If the power fails or is disconnected while the TV is powered on, the TV will turn on automatical-
ly when the power resumes.
AV MEMORY
This feature allows you to quickly adjust picture settings for MANUAL, SPORT, NEWS, MOVIE
and GAME to match the program you are watching.
1) Press the MENU button so that the menu display appears on the TV screen.
2) Press the VOL(ume) ▲ button so that "PICTURE" is selected.
3) Select the item with the CH(annel) ▲ or ▼ button.
Note: See "PICTURE ADJUSTMENT" to manually customize the picture.
: Press the CH(annel)
MANUAL
SLEEP 10
PICTURE ADJUSTMENT
1) Press the MENU button so that the menu dis-
play appears on the TV screen.
2) Press the VOL(ume)
"PICTURE" is selected.
3) Press the CH(annel) ▲ or ▼ button to select
"MANUAL". Then press the VOL(ume) ▲
button.
4) Select the feature you wish to adjust with the
CH(annel) ▲ or ▼ button and adjust it with the
VOL(ume) ▲ or ▼ button.
: Press the CH(annel) ▲ or ▼ button.
[-]
[+]
BRIGHT
PICTURE
CHANNEL SET
[ENG] / ESP / FRA
V-CHIP SET UP
CAPTION [ T2]
Note:
TV SOUND [MAIN]
In the above steps, the picture adjustment display will disappear from the TV screen automati-
●
cally after about 10 seconds if you do not press any buttons. Press the MENU and VOL(ume)
▲ button so that "PICTURE" is selected. Press the CH(annel) ▲ or ▼ button repeatedly until
the display returns to the screen.
MONO
MONO
SAP
SAP
-None-
-None-
-None-
-None-
MONO
MONO
STEREO
STEREO
MAIN
MAIN
SAP
SAP
▲ or ▼ button.
Menu
PICTURE
Selection
MAIN
MONO
SAP
CHANNEL SET
[ENG] / ESP / FRA
V-CHIP SET UP
-None-
-None-
-None-
CAPTION [OFF]
TV SOUND [MONO]
STEREO
MONO
STEREO
MAIN
MAIN
SAP
▲ or ▼ button.
SPORT
NEWS
▲ button so that
BRIGHT
CONTRAST
COLOR
TINT
SHARPNESS
[-]
[+]
[-]
[+]
CONTRAST
COLOR
ADD/DELETE
AUTO PRESET CH
To show the status, press the
DISPLAY button on the remote
control.
SAP: Second Audio Program,
which means your program, can
also be received in a second lan-
guage or sometimes a radio station.
PICTURE
CHANNEL SET
[ENG] / ESP / FRA
V-CHIP SET UP
CAPTION [OFF]
TV SOUND [SAP]
MOVIE
GAME
VOL(ume)
VOL(ume)
to decrease
to increase
brightness
brightness
to decrease
to increase
contrast
contrast
to pale
to brilliant
to purple
to green
to soft
to clear
[-]
[+]
[-]
[+]
TINT
SHARPNESS