Solid State Logic Sigma delta Guia De Instalacion página 10

Sigma Delta Install 1b_Print Layout 05/04/2016 10:39 Page 7
Specifications
Physical *
Depth 320mm / 12.75"
Height 89mm / 3.5" (2 RU)
Width 435mm / 17"
482mm / 19"
Weight 5kg / 11 pounds
Power < 60 Watts
Boxed size 510mm x 570mm x 280mm
20" x 22.5" x 11"
Boxed weight 10kg / 22 pounds
* All values are approximate
Environmental
Temperature Operating:
Non-operating:
Max. gradient:
Relative Operating:
Humidity Non-operating:
Max. wet bulb:
(non-condensing)
Vibration Operating:
Non-operating:
Shock Operating:
Non-operating:
Altitude Operating:
(above sea level) Non-operating:
Connections
casing only Power Supply
DC Power
Analogue I/O
casing only
inc' rack ears
Headphones
Footswitch
iJack
Network
USB
Performance
Maximum I/O Level
Frequency Response
+5 to 30 deg. C THD + N
–20 to 50 deg. C
Noise
15 deg. C/hour
CHIP to CHOP
20 to 80%
CHIP to MIX A
5 to 90%
29 deg. C
Electro Magnetic Compatibility
< 0.2 G (3 – 100Hz)
< 0.4 G (3 – 100Hz)
EN55103-1:2009, EN55103-2:2009
< 2 G (10ms max.)
Environment E4
< 10 G (10ms max.)
Initial in-rush current
0 to 3000m
5 sec in-rush current
0 to 12000m
Braid-screened cables should be used where applicable
Star Quad cables should be used where applicable
EMC Performance Criteria
Line level inputs and outputs
Measure at mid-gain, noise <–56dBu
IEC320 3-pin connector, 100 – 240 Vac, 50 – 60 Hz
2mm DC power jack, +12V, < 3A
25-pin D-type socket, balanced, Zin > 10kΩ, Zo ≈ 100Ω
3-pin XLR-M, balanced, Zo ≈ 100Ω
Stereo 1/4" jack socket, Zo ≈ 75Ω
Stereo 1/4" jack socket (1 circuit)
Stereo 3.5mm jack socket, Zi ≈ 10k
8P8c modular connector; 'RJ-45' type (100bT, Cat5)
1 x type-B chassis socket (SSL diagnostic use only)
+18dBu, +22dBu or 24dBu
20Hz – 40kHz ±0.3dB
< 0.025% (20Hz – 20kHz)
< –83dBu @ +24dBu (20Hz – 20kHz)
< –75dBu @ +24dBu (20Hz – 20kHz)
(stereo, all channels routed)
10A
10A
EN
DE
ES
FR
IT
JP
7